HOME HELP FEEDBACK SUBSCRIPTIONS ARCHIVE SEARCH TABLE OF CONTENTS		QUICK SEARCH:   [advanced] Author: Keyword(s): Year:  Vol:  Page:

This Article Figures Only Full Text Free Full Text (PDF) Free Alert me when this article is cited Alert me if a correction is posted Services Similar articles in this journal Alert me to new issues of the journal Download to citation manager Citing Articles Citing Articles via HighWire Citing Articles via Google Scholar Google Scholar Articles by Cobos, D. R. Articles by Baker, J. M. Search for Related Content PubMed Articles by Cobos, D. R. Articles by Baker, J. M. GeoRef GeoRef Citation Agricola Articles by Cobos, D. R. Articles by Baker, J. M. Related Collections Soil Methods/Instrumentation Soil Thermal Properties Heat Transport

SPECIAL SECTION - ADVANCES IN MEASUREMENT AND MONITORING METHODS

In Situ Measurement of Soil Heat Flux with the Gradient Method

USDA-ARS Soil and Water Management Unit, 1991 Upper Buford Circle, St. Paul, MN 55108
^* Corresponding author (dcobos{at}soils.umn.edu).

Received 12 March 2003.

The use of soil heat flux as a critical component of the surface energy balance is routine; however, its accurate quantification is not. The direct measurement of soil heat flux is generally accomplished with soil heat flux plates. However, the presence of heat flux plates causes perturbations in heat and fluid flow in the soil that may give rise to measurement errors. We describe here the direct measurement of soil heat flux with the gradient technique using a tri-needle instrument, where soil heat flux is the product of the soil thermal conductivity measured by transient heating of the center needle and the soil temperature gradient measured between the outer needles. Soil heat fluxes measured this way were compared with those obtained from commercially available soil heat flux plates. Laboratory trials revealed good precision and accuracy (error generally <5%) in measurements of thermal conductivity and soil heat flux with the heated needle technique in a medium-textured sand, but exposed occasional errors in the accurate determination of thermal conductivity arising from poor sensor-soil thermal contact in a coarser medium. Extended field data in a finer-textured soil showed good agreement among needle sensors and heat flux plates, and surprisingly did not reveal errors associated with fluid blockage by the heat flux plates. Our results indicate that the measurement of soil heat flux with the gradient technique with needle sensors is a viable alternative to heat flux plates, and may improve absolute accuracy of this measurement.

This article has been cited by other articles:

				T. E. Ochsner and J. M. Baker In Situ Monitoring of Soil Thermal Properties and Heat Flux during Freezing and Thawing Soil Sci. Soc. Am. J., July 1, 2008; 72(4): 1025 - 1032. [Abstract] [Full Text] [PDF]

				T. J. Sauer, T. E. Ochsner, and R. Horton Soil Heat Flux Plates: Heat Flow Distortion and Thermal Contact Resistance Agron. J., January 1, 2007; 99(1): 304 - 310. [Abstract] [Full Text] [PDF]

				T. E. Ochsner, T. J. Sauer, and R. Horton Field Tests of the Soil Heat Flux Plate Method and Some Alternatives Agron. J., June 5, 2006; 98(4): 1005 - 1014. [Abstract] [Full Text] [PDF]

				Y. Mori, J. W. Hopmans, A. P. Mortensen, and G. J. Kluitenberg Estimation of Vadose Zone Water Flux from Multi-Functional Heat Pulse Probe Measurements Soil Sci. Soc. Am. J., April 11, 2005; 69(3): 599 - 606. [Abstract] [Full Text] [PDF]