HOME HELP FEEDBACK SUBSCRIPTIONS ARCHIVE SEARCH TABLE OF CONTENTS		QUICK SEARCH:   [advanced] Author: Keyword(s): Year:  Vol:  Page:

This Article Figures Only Full Text Free Full Text (PDF) Free Alert me when this article is cited Alert me if a correction is posted Services Similar articles in this journal Similar articles in ISI Web of Science Alert me to new issues of the journal Download to citation manager Citing Articles Citing Articles via HighWire Citing Articles via ISI Web of Science (4) Citing Articles via Google Scholar Google Scholar Articles by Perfect, E. Articles by Dane, J. H. Search for Related Content PubMed Articles by Perfect, E. Articles by Dane, J. H. GeoRef GeoRef Citation Agricola Articles by Perfect, E. Articles by Dane, J. H. Related Collections Vadose Zone Processes and Chemical Transport Water Retention/Capillary Pressure Multiphase Fluid Flow

SPECIAL SECTION: UNCERTAINTY IN VADOSE ZONE FLOW AND TRANSPORT PROPERTIES

Capillary Pressure–Saturation Relations for Saprolite

Scaling With and Without Correction for Column Height

^a Dep. of Earth and Planetary Sciences, Univ. of Tennessee, Knoxville, TN 37996-1410
^b 1463 Oxford Place, Cookeville, TN 38506
^c Institute for Hydraulics and Rural Water Management, BOKU, Muthgasse 18, A-1190 Vienna, Austria
^d Dep. of Agronomy and Soils, Auburn Univ., Auburn, AL 36849-5412
^* Corresponding author (eperfect{at}utk.edu).

Received 19 January 2004.

Dense nonaqueous phase liquids (DNAPLs) are important subsurface contaminants. Information is lacking on DNAPL behavior in heterogeneous porous media such as weathered rock (saprolite). We measured air–water and Fluorinert (a nontoxic DNAPL surrogate; 3M, St. Paul, MN)–water capillary pressure–saturation relations, _w(h_c), close to saturation on an 18-cm-long by 10-cm-diameter undisturbed column of interbedded sandstone and clayshale saprolite. The Campbell empirical model was fitted to both _w(h_c) relations. The resulting best-fit parameters were 19.54 and 30.10 cm of H₂O for the displacement capillary pressure head (h₀) and 0.029 and 0.045 for the pore-size distribution index (1/b), for the air–water and Fluorinert–water data, respectively. Corresponding model parameters corrected for the hydrostatic fluid distribution within the column were 14.08 and 15.96 cm of H₂O for h₀, and 0.026 and 0.034 for 1/b. The correction procedure had a large effect on the Fluorinert–water _w(h_c) relation and relatively little impact on the air–water _w(h_c) relation. Parameters from the air–water relations were used to predict Fluorinert–water _w(h_c) relations using the expression: (h₀)₂ = (₂/₁)(h₀)₁, where (h₀)₁, (h₀)₂ and ₁, ₂ are the capillary displacement pressure heads and interfacial tensions with water for air and Fluorinert, respectively. These analyses showed that direct measurements of the Fluorinert–water _w(h_c) relation need to be corrected for column height. The corrected Fluorinert–water _w(h_c) relation was accurately predicted (R² 0.99) by both the fitted and corrected (h₀)₁ values. Thus, the error in prediction introduced by not considering column height or contact angle effects was relatively small. Our results show that scaled air–water _w(h_c) relations can be used to predict DNAPL intrusion into water-saturated saprolite at a physical point.

Abbreviations: DNAPL, dense nonaqueous phase liquid • SWSA, Solid Waste Storage Area

This article has been cited by other articles:

				R. M. Holt and M. J. Nicholl Uncertainty in Vadose Zone Flow and Transport Prediction Vadose Zone J., May 1, 2004; 3(2): 480 - 484. [Full Text] [PDF]