HOME HELP FEEDBACK SUBSCRIPTIONS ARCHIVE SEARCH TABLE OF CONTENTS		QUICK SEARCH:   [advanced] Author: Keyword(s): Year:  Vol:  Page:

This Article Figures Only Full Text Full Text (PDF) Alert me when this article is cited Alert me if a correction is posted Services Similar articles in this journal Similar articles in ISI Web of Science Alert me to new issues of the journal Download to citation manager Citing Articles Citing Articles via Google Scholar Google Scholar Articles by Bakker, G. Articles by Kruidhof, H. Search for Related Content PubMed Articles by Bakker, G. Articles by Kruidhof, H. GeoRef GeoRef Citation Agricola Articles by Bakker, G. Articles by Kruidhof, H. Related Collections Water Retention/Capillary Pressure Soil Methods/Instrumentation

ORIGINAL RESEARCH

New Polymer Tensiometers: Measuring Matric Pressures Down to the Wilting Point

^a ALTERRA, Wageningen Univ. and Research Centre, Droevendaalsesteeg 4, 6708 PB, Wageningen, the Netherlands
^b Dep. of Environmental Sciences, Soil Physics, Ecohydrology and Groundwater Management Group, Wageningen Univ. and Research Centre, Droevendaalsesteeg 4, 6708 PB, Wageningen, the Netherlands
^c Lab. for Physical Chemistry and Colloid Science, Wageningen Univ. and Research Centre, Dreijenplein 6, 6703 HB, Wageningen, the Netherlands
^d Faculty of Science and Technology, Twente Univ., Langezijds LA 1727, P.O. Box 217, 7500 AE, Enschede, the Netherlands
^* Corresponding author (martine.vanderploeg{at}wur.nl)

Received 10 August 2006.

Tensiometers are commonly used for measuring soil water matric pressures. Unfortunately, the water-filled reservoir of conventional tensiometers limits their applicability to soil water matric pressures above approximately –0.085 MPa. Tensiometers filled with a polymer solution instead of water are able to measure a larger range of soil water matric pressures. We designed and constructed six prototype polymer tensiometers (previously called osmotic tensiometers) consisting of a wide-range pressure transducer with a temperature sensor, a stainless steel casing, and a ceramic plate with a membrane preventing polymer leakage. A polymer chamber (0.1–2.2 cm³) was located between the pressure transducer and the plate. We tested the polymer tensiometers for long-term operation, the effects of temperature, response times, and performance in a repacked sandy loam under laboratory conditions. Several months of continuous operation caused a gradual drop in the osmotic pressure, for which we developed a suitable correction. The osmotic potential of polymer solutions is temperature dependent, and requires calibration before installation. The response times to sudden and gradual changes in ambient temperature were found to be affected by polymer chamber height and polymer type. Practically useful response times (<0.2 d) are feasible, particularly for chambers shorter than 0.20 cm. We demonstrated the ability of the instrument to measure the range of soil water pressures in which plant roots are able to take up water (from 0 to –1.6 MPa), to regain pressure without user interference and to function properly for time periods of up to 1 yr.

Abbreviations: CT, conventional (water-filled) tensiometer • POT, polymer tensiometer • TDR, time domain reflectometer