HOME HELP FEEDBACK SUBSCRIPTIONS ARCHIVE SEARCH TABLE OF CONTENTS		QUICK SEARCH:   [advanced] Author: Keyword(s): Year:  Vol:  Page:

This Article Figures Only Full Text Full Text (PDF) Alert me when this article is cited Alert me if a correction is posted Services Similar articles in this journal Alert me to new issues of the journal Download to citation manager Citing Articles Citing Articles via HighWire Google Scholar Articles by Langergraber, G. PubMed Articles by Langergraber, G. GeoRef GeoRef Citation Agricola Articles by Langergraber, G. Related Collections Wetlands and Aquatic Processes Multicomponent Transport Models Water Pollution

SPECIAL SECTION: VADOSE ZONE MODELING

Modeling of Processes in Subsurface Flow Constructed Wetlands: A Review

Institute of Sanitary Engineering and Water Pollution Control, Univ. of Natural Resources and Applied Life Sciences, Vienna (BOKU), Muthgasse 18, A-1190 Vienna, Austria
^* Corresponding author (guenter.langergraber{at}boku.ac.at).

Received 22 March 2007.

Constructed wetlands (CWs) provide a natural way for simple, inexpensive, and robust wastewater treatment. Detailed understanding of CW functioning is difficult, because a large number of physical, chemical, and biological processes occur in parallel and influence each other. For this reason, CWs have long been seen as "black boxes" where wastewater enters and treated water leaves the system. Numerical models describing the biochemical transformation and degradation processes in CWs are promising tools to better understand CW functioning. The first part of this paper reviews published mechanistic models for CWs. Horizontal flow systems can be simulated when only water flow saturated conditions are considered; six models have been reviewed whereby a series or network of completely stirred tank reactors is most frequently used to describe the hydraulics. For modeling vertical flow CWs with intermittent loading, transient variably saturated flow models are required. Due to the intermittent loading, these systems are highly dynamic, adding to the complexity of the overall system. Five models of different complexity have been reviewed; three use the Richards equation to describe variably saturated flow, whereas the two others use simplified approaches. In the second part of the paper, the multicomponent reactive transport module CW2D is demonstrated. Simulation results for CWs treating domestic wastewater, combined sewer overflow, and surface water are presented. In general, a good match between simulation results and measured data could be achieved if the hydraulic behavior of the system could be described well. Based on the experience from these examples, the need for further model development is determined.

Abbreviations: AO7, acid orange 7 • ASM, Activated Sludge Model • BOD, biochemical oxygen demand • COD, chemical oxygen demand • CSO, combined sewer overflow • CSTR, completely stirred tank reactor • CW, constructed wetland • HF, horizontal flow • HRT, hydraulic residence time • PSCW, pilot-scale constructed wetland • RCB, RetrasoCodeBright • RTD, residence time distribution • SF, surface flow • SIR, substrate-induced respiration • SSF, subsurface flow • VF, vertical flow

This article has been cited by other articles:

				J. Simunek and S. A. Bradford Vadose Zone Modeling: Introduction and Importance Vadose Zone J., May 27, 2008; 7(2): 581 - 586. [Full Text] [PDF]